Ref. 01564Elastic membranes
Imperblock Antigoteras
Water-based elastic waterproofing coating
- Consumption
- 1–1.5 L/m²
- Coats
- 2
- Sizes
- 4 L and 15 L
SRI index
Ref. 01590 Elastic membranes
Imperblock Fibrado
Elastic coating reinforced with glass fibre
The same elastic waterproofing reinforced with glass fibre: greater mechanical resistance and suitable for occasional foot traffic.
- Foot traffic
- Consumption
- 1–1.5 L/m² per coat
- Coats
- 2
- Sizes
- 4 L and 15 L
- Finish
- Silky matt
SRI index
Compare this range · Waterproofing Features
- Glass-fibre reinforced
- High mechanical resistance
- Suitable for foot traffic
- High elasticity and crack bridging
- Waterproof against rain and splashes
- Good adhesion to multiple surfaces
- Odourless and non-flammable
- Silky matt finish
Technical data
- Ref.
- 01590
- Range
- Waterproofing · Elastic membranes
- Base
- Water
- Finish
- Silky matt
- Use
- Exterior
- Consumption
- 1–1.5 L/m² per coat
- Coats
- 2
- Sizes
- 4 L and 15 L
- Colours
- White · Grey · Terracotta · Red · Green
- Traffic
- Pedestrian
- Application
- Brush · Roller
Performance
Rated on 5 levels, comparable only within the range · Waterproofing
Scale 1–5
- 5 · Top performance in the range
- 4 · High
- 3 · Medium-high, sufficient for standard use
- 2 · Medium
- 1 · Not the product's purpose
Properties
- Foot traffic
- Yes
Certifications
- SRI index
Solar Reflectance Index (SRI)
ASTM E1980-11 (2019)
Quantifies the surface's solar reflectance: the higher the index, the lower the substrate temperature and the lower the building's cooling demand.
Recommended CPP system In waterproofing the substrate determines whether a primer is needed, how many coats and which membrane. Adhesion is the system's critical point.
-
Roof concrete and mortar Mineral
Porous and alkaline. Needs full curing and no rising damp; otherwise the membrane blisters when it heats up.
CPP system: Imperblock Imprimación + Antigoteras, Fibrado or Membrana Hybrid.
-
Aged bituminous membrane Bituminous
Oxidised, with loose gravel and open overlaps. It can bleed through and stain light finishes if not sealed.
CPP system: Overlap repair + Imperblock Antigoteras in 2 cross-applied coats.
-
Ceramic and stoneware tiles Non-porous
No absorption: without a primer the membrane will not bond. Water ingress concentrates at the joints.
CPP system: Imperblock Imprimación + Fibrado or Membrana Hybrid.
-
Fibre cement and metal sheeting Non-porous
High thermal expansion and risk of rust at fixings and overlaps. Degrease and treat rust before waterproofing.
CPP system: Rust treatment + Imperblock Fibrado with reinforcing tape at overlaps.
-
Old acrylic waterproofing Repaint
If it retains cohesion it is a good substrate; if it is powdery or detached it must be removed completely.
CPP system: Adhesion test + reinforcement with Antigoteras or Fibrado.
-
Parapets, junctions and drains Detail point
They account for 90% of water ingress. Sharp edges and right angles tear the membrane due to lack of radius.
CPP system: Cove fillet, minimum 15 cm upstand and mesh reinforcement.
Related products
From the same range, starting with its group.
-
Ref. 01608Hybrid membranes
Imperblock Membrana Hybrid PU
Acrylic membrane with polyurethane
- Consumption
- 1–1.5 L/m²
- Coats
- 2
- Sizes
- 4 L and 15 L
- Foot traffic
Ref. 01642Polyurethane
Imperblock Poliuretano
One-component aliphatic polyurethane
- Consumption
- 1–1.5 L/m²
- Coats
- 2
- Sizes
- 750 ml, 4 L and 15 L
- Foot traffic
CPP Chemical Group
Interested in Imperblock Fibrado?
We make it under your label and in your packaging, with full confidentiality, or supply it under the CPP brand, ready to sell. Ask for a sample or a no-obligation quote.