Skip to main content
Imperblock Imprimación, Water-based clear primer

Ref. 01486 Preparation

Imperblock Imprimación

Water-based clear primer

Request a sample Request a quote

Prepares the substrate before waterproofing: penetrates and seals porous surfaces and ensures adhesion even on low- or non-absorbent substrates. Essential prior step for the polyurethane system.

Coverage rate
12–14 m²/L per coat
Coats
1
Sizes
750 ml and 4 L
Finish
Clear gloss
Compare this range · Waterproofing

Features

  • Improves adhesion of the Imperblock system
  • Excellent adhesion on non-porous substrates
  • Deep penetration and sealing on porous substrates
  • Compatible with porous and non-porous substrates
  • Low odour during application and drying
  • Clear gloss finish
  • Easy application
  • Ready to use

Technical data

Ref.
01486
Range
Waterproofing · Preparation
Base
Water
Finish
Clear gloss
Use
Exterior
Coverage rate
12–14 m²/L per coat
Coats
1
Sizes
750 ml and 4 L
Colours
Colourless
Traffic
Not applicable
Application
Brush · Roller

Performance

Rated on 5 levels, comparable only within the range · Waterproofing

Scale 1–5
  • 5 · Top performance in the range
  • 4 · High
  • 3 · Medium-high, sufficient for standard use
  • 2 · Medium
  • 1 · Not the product's purpose

Properties

Foot traffic
No

Certifications

This reference has no specific certifications declared in the catalogue.

Recommended CPP system In waterproofing the substrate determines whether a primer is needed, how many coats and which membrane. Adhesion is the system's critical point.

  • Roof concrete and mortar Mineral

    Porous and alkaline. Needs full curing and no rising damp; otherwise the membrane blisters when it heats up.

    CPP system: Imperblock Imprimación + Antigoteras, Fibrado or Membrana Hybrid.

  • Aged bituminous membrane Bituminous

    Oxidised, with loose gravel and open overlaps. It can bleed through and stain light finishes if not sealed.

    CPP system: Overlap repair + Imperblock Antigoteras in 2 cross-applied coats.

  • Ceramic and stoneware tiles Non-porous

    No absorption: without a primer the membrane will not bond. Water ingress concentrates at the joints.

    CPP system: Imperblock Imprimación + Fibrado or Membrana Hybrid.

  • Fibre cement and metal sheeting Non-porous

    High thermal expansion and risk of rust at fixings and overlaps. Degrease and treat rust before waterproofing.

    CPP system: Rust treatment + Imperblock Fibrado with reinforcing tape at overlaps.

  • Old acrylic waterproofing Repaint

    If it retains cohesion it is a good substrate; if it is powdery or detached it must be removed completely.

    CPP system: Adhesion test + reinforcement with Antigoteras or Fibrado.

  • Parapets, junctions and drains Detail point

    They account for 90% of water ingress. Sharp edges and right angles tear the membrane due to lack of radius.

    CPP system: Cove fillet, minimum 15 cm upstand and mesh reinforcement.

Related products

From the same range, starting with its group.

Waterproofing

  • Ref. 01564Elastic membranes

    Imperblock Antigoteras

    Water-based elastic waterproofing coating

    Silky matt · Exterior

    Consumption
    1–1.5 L/m²
    Coats
    2
    Sizes
    4 L and 15 L
    SRI index

  • Ref. 01590Elastic membranes

    Imperblock Fibrado

    Elastic coating reinforced with glass fibre

    Silky matt · Exterior

    Consumption
    1–1.5 L/m²
    Coats
    2
    Sizes
    4 L and 15 L
    • Foot traffic
    SRI index

  • Ref. 01608Hybrid membranes

    Imperblock Membrana Hybrid PU

    Acrylic membrane with polyurethane

    Matt · Exterior

    Consumption
    1–1.5 L/m²
    Coats
    2
    Sizes
    4 L and 15 L
    • Foot traffic
CPP Chemical Group

Interested in Imperblock Imprimación?

We make it under your label and in your packaging, with full confidentiality, or supply it under the CPP brand, ready to sell. Ask for a sample or a no-obligation quote.

Request a sample Request a quote